What is the working principle of the two screw extruder?Due to the small center distance of the two screw extruder, it is impossible to use large-diameter thrust bearings. The bearing capacity of thru...
Double screw extruder should follow the principles of temperature, deceleration and structure when used. When the double screw extruder is working, it needs to overcome a lot of resistance. Therefore,...
The correct start-up of the double screw extruderHeat the double screw extruder to ensure that the temperature at various points such as the body, head, die, and control is within the specified range....
1. The characteristics of two-screw extruderThe two-screw extruder has adopted computer and electronic control technology, so that the process parameters of the entire extrusion process can be detecte...
Ⅰ. Auxiliary equipment of double screw extruder machine1. Straightening device. During the extrusion of the sheath, the scratches on the surface of the sheath are caused by the bending of the cable c...
Ⅰ. The principle of the unstable end base of the two-screw extruderIn the production process of FEP, because the initiator used in the aqueous phase polymerization reaction system is a persulfate suc...
1. Check the dual-screw extruder barrel, the top and bottom of the hopper, and whether there are foreign objects before starting each time, check whether the fastening bolts of each part are loose, wh...
The dual-screw extruder adopts helical gear or hard-tooth surface gear reducer, which has stable transmission, long sound and long service life. The shaft seal has advanced structure and good sealing ...
In the process of producing products with double-screw extruders, not only should the quality of the products be guaranteed by adjusting the machine, but also the safety of the operators should be giv...
Tel: +86-25-52706155
E-mail: info@kymach.com
No.59 West Tianyuan Road, Jiangning, Nanjing, Jiangsu Province, China
English 
日本語 
한국어 
français 
Español 
русский 
português 
العربية 
中文
