We should know that at present the mixing pelletizer is one of the key equipment for material modeling. The practical mixing pelletizer is a kind of special molding equipment mainly designed for powder or small granular materials. The characteristics of the mixing pelletizer include uniform discharge, high yield, compact structure and reasonable layout. Therefore, the mixing pelletizer can meet the requirements of sludge ceramsite, shale ceramsite, coal ash ceramsite, etc. on the pelletizing technology. However, it is important to pay attention to some important matters in the process of using the mixing pelletizer to prolong its life. The specific content is as follows:
1. Pay attention to the operation of the equipment
In the process of operation, it is forbidden to operate the reliable mixing pelletizer which is cold in temperature and contains nothing inside. The user must first heat the engine and feed in raw material for operation, so that to a large extent the phenomenon of journal sticking of the machine body can be avoided. In addition, in the process of operation of the mixing pelletizer, iron and other sundries are strictly prohibited to be put into the feed port and the discharge hole in order to avoid accidents, which may affect the production.
2. Pay attention to the temperature change of the equipment
Users should pay attention to the temperature change of the body of the equipment during the process of using the mixing pelletizer. When touching the equipment with clean hands, if the sliver doesn't stick to hands, it should be heated up immediately until the sliver does. In addition, if the bearing part of the mixing pelletizer reduction box burns hands or give out noise, timely maintenance and supplement refueling are needed. When the bearing parts at both ends of the main engine bearing room of the mixing pelletizer burn hands or have noises, it is necessary to stop maintenance and add butter.
3. Pay attention to the operation law of the equipment
It is necessary for users to find out the operation law of the equipment in the process of using the mixing pelletizer which is favored by customers. For example: Judge the condition of the machine according to the temperature and rotate speed, and have timely treatment according to the operation condition of the equipment. When the operation of the body of the mixing pelletizer is unstable, users should attentively check whether the gap between the coupling device and the mixing pelletizer is too tight and whether the mixing pelletizer is running forward.
In addition, when using the mixing pelletizer, it is necessary to ensure that there is no hard debris in the machine to avoid damage in the circular mould and compression roller. When starting up the mixing pelletizer, it is required to conduct the process of punching with oil plants, and ensure the smooth discharge of the equipment at the next start-up. In a word, in the process of operation of the mixing pelletizer, users should strictly conform to the installation operation instructions, understand the sequence of the operation of the equipment, and timely do maintenance of the mixing pelletizer.
Tel: +86-25-52706155
E-mail: info@kymach.com
No.59 West Tianyuan Road, Jiangning, Nanjing, Jiangsu Province, China
English 
日本語 
한국어 
français 
Español 
русский 
português 
العربية 
中文
